List Price: CAD 314.60 CAD 173.03 -45%
The ZA-42 Zone Expansion adder is a simplistic means to expand the PFC-5004E into an Eight Zone Class B (Style B) or a Four Zone Class A (Style D) fire alarm control panel. In addition, the ZA-42 expands the panel to have Four Notification Circuits rated at 1.7 amps each.
Datasheet Add to cart
• Provides 4 class B (Style B) or 2 Class A (Style D) Initiating Circuits
• Provides 2 Class B (Style Z/Y) Notification Circuits
• Directly powered from PFC-5004E fire alarm panel main board
• Up to 1.7 amps per each Notification Circuit
Description
The ZA-42 Zone Expansion adder is a simplistic means to expand the PFC-5004E into an Eight Zone Class B (Style B) or a Four Zone Class A (Style D) fire alarm control panel. In addition, the ZA-42 expands the panel to have Four Notification Circuits rated at 1.7 amps each.
Installation
The PFC-5004E is designed to have the ZA-42 directly fasten to the front faceplate and plug into for communication and power. In addition, a single jumper is moved on the main fire alarm board to supervise the expansion board.
Engineering Specification
The Potter ZA-42 shall be installed in the PFC-5004E when zone expansion is required. The ZA-42 shall provide 4 additional Class B (Style B) or 2 Class A (Style D). In addition, the module shall provide 2 Notification Circuits rated at 1.7 amps each. The Notification Circuits shall be Class A (Style Z) or Class B (Style Y).
The ZA-42 shall be directly powered from the PFC-5004E and the communication to the main board shall be through a ribbon cable. All circuits shall be fully supervised. Configuration of the ZA-42 shall be done through dipswitches located on the main fire alarm board as well as the ZA-42.
• Connect the EOL Diode Resistor Assembly as required at remote locations for supervision of releasing circuit solenoids and electric actuators.
• Resistor Value – 5.1K Ohm / 5% Tolerance.
• Refer to panel installation manuals for additional details
CAD 6.59
